智慧優化快速試產PCB 製造系統

目前PCB產業試產製程中各站多採用人工方式進行參數監控以及手動進行參數調適，而每一輪試產製程間須進行樣品檢查及參數調適，單次製程的時間約需耗時達40分鐘以上，並且單一料號調適週期約需要4~6次，故要能達成快速試產必定需要導入製程智慧化技術，本文提出建立自動化監控製程參數及量測並智慧化進行參數的調適，除了可以大幅縮短樣品檢查及參數調適時間外，利用AI預判斷優化參數系統亦可以有效減少反覆調適次數，減少整體試產時間以及人力成本。

In the current PCB industry most trial production processes involve manual parameter monitoring and adjustments. Each trial production cycle requires sample inspections and parameter adjustments, with a single process taking over 40 minutes. Additionally, a single part number requires 4 to 6 adjustment cycles. Therefore, to achieve rapid trial production, the implementation of intelligent process technology is essential. This article proposes the establishment of an automated system for monitoring and measuring process parameters, with intelligent parameter adjustments. This system not only significantly reduces the time for sample inspections and parameter adjustments but also utilizes AI to predict and optimize parameters, effectively reducing the number of repeated adjustments, overall trial production time, and labor costs.